Eagle Access Control Systems Eagle-E7 Bedienungsanleitung PDF herunterladen (Seite 3)

Eagle ® ICS System – Unicard CR211 User & Installation Instructions Page 3 of 17

Set Password

Open the card reader

Press RST button on the

circuit board

Wait for 4 bleep confirmation

Enter a 6-digit code

The following codes are not permitted: 00 00 00, 19 92 00 – 19

92 99

Press #

Wait for 2 short and one long

confirmation bleep

Ensure that you record the number entered

Press *

Close the card lock

3. Programming of Cards

Unicard has the capacity to store 98 cards and PIN codes and one

password code. The cards are stored at fixed addresses (101 to

198).

You should make a log of which cards are stored at which address

(a sheet is enclosed at the end of these instructions). Each card

could be combined with one of the following relay functions :-

< 1 > - Relay 1 monostable

(timed)

< 5 > - Relay 2 bistable

(latching)

< 2 > - Relay 2 monostable

(timed)

< 6 > - Relay 1 and relay 2

bistable

< 3 > - Relay 1 and relay 2

monostable

< 7 > - Relay 1 if relay 2 is

activated

< 4 > - Relay 1 bistable

(latching)

< 8 > - Alarm function

1 2 3 4 5 6 7 8 ... 16 17

Keine Kommentare

Eagle Access Control Systems Eagle-E7 Bedienungsanleitung Seite 3